TCP/IP Protocol Commands

<hostid> format : xxx.xxx.xxx.xxx (ip Address)
<ether addr> format : xx:xx:xx:xx:xx:xx
<iface> : enif0, enif1
<gw> : gateway ip address

ip address                      display host ip address
ip adjmss   [<mss>] change TCP MSS (maximum segment size)
ip adjTcp   <iface> [<mss>]  
ip alias   <iface> create a new alias for interface (defaultexisting aliases are enif0:0 enif0:1)
ip aliasdis   <0|1> enable|disable  routing between Alias
ip antiprobe   <0|1> 1:yes 0:no
ip arp add <hostid> ether <ether addr> add arp
ip arp drop <hostid> [ether] drop arp 
ip arp flush   flush arp
ip arp publish   add proxy arp
ip arp replydif [<0:No|1:yes>] Disable/Enable ARP reply between LAN and WAN ethernet interface
ip arp resolve <hostid> resolve IP address
ip arp status   display arp status
ip dhcp <iface name>     set dhcp configuration
ip dhcp <iface name> server arpcount <num> set IP probing count (default: 4)
ip dhcp <iface name> server dnsserver <dns1> <dns2> set IP of DNS servers for clients (default: use DNS proxy)
ip dhcp <iface name> server gateway <gateway IP> set IP of default gateway for clients (default: IP of interface)
ip dhcp <iface name> server hostname <hostname-prefix> set host-name prefix for served in pool (default dhcp)
ip dhcp <iface name> server leasetime <period> set lease time for server (default: 259600 seconds)
ip dhcp <iface name> server netmask <netmask> set netmask for clients in pool (default: /24)
ip dhcp <iface name> server pool <start IP> <num> set base and number of IP addresses in pool
ip dhcp <iface name> server rebindtime <period> set rebind time for clients (default: 226800 seconds)
ip dhcp <iface name> server renewaltime <period> set renewal time for clients (default: 129600 seconds)
ip dhcp <iface name> server  reset reset DHCP leases
ip dhcp <iface name> status . display iface DHCP information  iface-name: enif1, enif0
ip dhcp <iface name> client release release DHCP client IP
ip dhcp <iface name> client renew renew DHCP client IP
ip dns default <ip>  
ip dns query address <ip address> [tm] DNSの逆引き
ip dns query debug <num>  
ip dns query name <host name> [tm] DNSの正引き
ip dns query status  
ip dns query table  
ip dns server    
ip dns stats clear clear dns statistics
ip dns stats disp display dns statistics
ip dns table   display dns table
ip httpd debug [on|off] HTTPD debug
ip icmp echo [on|off] turn on/off echo response
ip icmp status   display icmp statistic counter
ip icmp trace [on|off] turn on/off trace for debugging
ip icmp discovery <iface name> [on|off] turn on/off icmp router discovery response
ip ident   [on|off] Reject IDENT packet switch [on:Deny, off:Reject]
ip ifconfig     display all ifconfig
ip ifconfig   <iface>  display <iface> ifconfig
ip ifconfig   <iface> [/<bits>][gateway] setup <iface> 
ip igmp debug    
ip igmp forwardall    
ip igmp iface <iface>  
ip igmp querier    
ip igmp robustness    
ip igmp status    
ip nat iamt   IAMT Table を表示する
ip nat iface <iface> display dynamic NAT table by interface
ip nat incikeport [<yes|no>]  
ip nat lookup <set #>  
ip nat loopback [on|off] Enable/disable LAN user to use Internet IP to access internal server on the LAN
ip nat new-lookup <set #>  
ip nat reset   NATのリセット
ip nat resetport    
ip nat server clear clear working buffer
ip nat server disp  
ip nat server edit  
ip nat server load <set#>  
ip nat server save  
ip nat service    
ip nat timeout generic [seconds] change UDP NAT timeout time, default is 180 seconds
ip nat timeout gre  
ip nat timeout iamt  
ip nat timeout reset  
ip nat timeout tcp [seconds] change TCP connection phase timeout time, default is 270 seconds
ip nat timeout tcpother [seconds] change TCP data phase timeout time, default is 9000 seconds
ip nat update    
ip ping   <hostid>  ping remote host
ip pong   <hostid> [<size> <time-interval>]  
ip rip accept <gateway> drop an entry from the RIP information
ip rip activate   Initial the RIP listener list
ip rip dialin_user [show/in/out/both/none] Dialin users RIP direction
ip rip merge [on|off] RIP merging
ip rip mode <iface> [in|out] [mode] mode: 0 - 3
ip rip refuse <gateway> add an entry to the RIP refuse list
ip rip request    
ip rip reverse [on|off] RIP Poisoned Reverse
ip rip status   display rip statistic counters
ip rip trace   turn on/off rip trace 0:off 1:on
ip route add <dest addr>[/<bits>] <gateway> [<metric>] add route
ip route addiface <dest addr>[/<bits>] <iface> [<metric>] add iface
ip route addprivate <dest addr>[/<bits>] <gateway> [<metric>] add private route
ip route drop <host address> [/bits] drop a route
ip route errcnt clear clear routing statistic counters
ip route errcnt disp disp routing statistic counters
ip route flush   flush route table
ip route lookup <host address> [/bits] show host route table
ip route status   display routing table
ip samenet   <iface1> [<iface2>]  
ip status     display ip statistic counters
ip tcp ceiling <value> TCP maximum round trip time
ip tcp floor <value> TCP minimum rtt
ip tcp irtt <value> TCP default init rtt
ip tcp kick    
ip tcp limit <value> TCP output window limit (default 2 segments)
ip tcp mss <size> TCP input MSS
ip tcp reset   reset a TCP connection
ip tcp rtt   set smooth round trip time for specified TCP
ip tcp status <tcb> [<interval>] display TCP statistic counters
ip tcp syndata [on|off] TCP syndata piggyback
ip tcp trace [on|off] turn on/off trace for debugging
ip tcp window [size] TCP input window size
ip tftp stats   display TFTP Statistics
ip tftp support    
ip udp status   dump UDP statistics and control blocks
ip uninet   <iface>  
ip xparent break <iface> detach this interface by breaking any transparent bridging with other interfaces
ip xparent join <iface> display interfaces that are joined in a transparent bridge with this interface
ip xparent join <iface 1> <iface 2> join other interfaces in a transparent bridge with the first interface